6 Best ATV Underglow Lights for Night Rides

For most buyers, the RGB LED Rock Lights Kit, 6-Pod Vehicle Underglow Kit is the top pick among the best atv underglow lights because six separate pods can create more even coverage than a single light bar. Its compact pod design also fits frame and wheel areas more easily, making it a practical choice for riders who want visible color without a bulky install.

This guide is for ATV owners comparing accent lighting for trail rides, garage projects, or night visibility. Focus first on coverage, pod placement, cable length, and water resistance, since those details affect both the look and the installation. Power matters too, especially if the kit connects to a small battery or must run for several hours. The six picks below are ranked with clear reasons and honest drawbacks for each, so you can match the lighting kit to your vehicle, budget, and planned use.

Quick Comparison

6 Top ATV Underglow Light Picks

These six picks are ranked by brightness, durability, installation ease, and value, counting down to the top choice.

6. Nilight RGB LED Rock Lights Kit

Best for: Customizing trucks and off-road rigs

The Nilight kit includes four wheel-well lights, each fitted with 18 5050 SMD LEDs. Their wide-angle design spreads light across the wheel area instead of focusing on a narrow spot. You can choose from 16 million static colors, then adjust brightness or switch between 29 effects, including flashing, breathing, and color-jump patterns. Around $45, it offers plenty of control for a relatively low-cost lighting upgrade.

Each light uses an aluminum base to move heat away from the LEDs and a scratch-resistant PC lens. The sealed housing carries an IP67 waterproof rating, so rain and muddy trail conditions should not be a concern when the wiring is installed correctly. Control options include onboard buttons, RF and IR remotes, and a Bluetooth app. The app adds music and microphone synchronization, device grouping, and timer settings. Installation includes sponge pads, mounting hardware, connecting plugs, and adhesive for the control box. Still, this is a wired project that requires access to a suitable power source.

Pros

• Four lights and wide-angle lenses cover wheel wells with broad illumination.
• IP67 sealing, aluminum bases, and PC lenses suit outdoor vehicle use.
• App, button, and remote controls provide 29 effects and timer settings.

Cons

• Wiring and power connections require hands-on installation and careful routing.
• Four fixtures may not provide even coverage on larger trucks or long wheelbases.

Check Price on Amazon →

5. RGB Rock Lights for Trucks

Best for: Trucks, Jeeps, and UTV night use

This eight-pod RGB underglow kit adds colored lighting beneath trucks, Jeeps, SUVs, ATVs, golf carts, and UTVs. Each pod uses a five-sided design for light in multiple directions, with the maker claiming three times the output of standard LEDs. The system offers 16 million color choices and 213 animated patterns through the DITRIO app. It can also turn bright red during braking, which may improve rear visibility in dark areas.

The app supports separate left and right zones, so each side can use different colors, brightness levels, or effects. Music synchronization adds another option for shows and gatherings. Two RF remotes are included, one with 17 keys and one with four, with a stated range of 32.8 feet. The kit uses dual-path wiring, a built-in power switch, and a fuse for short-circuit protection. IP67-rated connectors and screw-on caps help protect against dust, rain, mud, and snow. Around $53, it offers many control features for the price, but installation still requires careful wire routing and mounting.

Pros

• Five-sided pods spread light around the vehicle’s underside.
• App control supports independent left and right lighting zones.
• IP67 protection, sealed connectors, and a fuse suit outdoor use.

Cons

• Installation requires connecting and routing multiple wires beneath the vehicle.
• Brake lighting and underglow colors may conflict with local vehicle-lighting laws.

Check Price on Amazon →

4. Nicoko 4Pods Rock Lights

Best for: White trail lighting on trucks and UTVs

The Nicoko 4Pods kit adds bright underbody lighting to trucks, SUVs, UTVs, ATVs, RZRs, and boats. Each pod uses 72 pure-white SMD LEDs, for 288 LEDs across the set. The listed 72-watt output and 180-degree beam angle should spread light across the ground and nearby trail edges. Compatibility covers 9V to 36V DC systems, which includes most common 12V vehicle setups.

Its IP68 waterproof rating suits muddy trails, water crossings, and exposed mounting locations. The sealed housing also includes heat-dissipation design and impact resistance, useful for off-road driving. Nicoko lists a 50,000-hour LED lifespan and a 24-month warranty. Around $45, the kit offers a large LED count for the price. Still, buyers should confirm the mounting space and wiring plan before ordering, since the listing does not provide detailed installation dimensions or control options.

Pros

• Four pods provide 288 pure-white SMD LEDs in total.
• IP68 protection fits wet, muddy, and exposed vehicle use.
• 9V to 36V support works with cars, trucks, ATVs, UTVs, and boats.

Cons

• The kit produces white light only, with no listed color-changing feature.
• Detailed pod dimensions, wiring components, and installation instructions are not provided in the listed specifications.

Check Price on Amazon →

3. 4-Pod RGB LED Rock Light Kit

Best for: Budget-minded 12V off-road vehicle owners

This kit adds colored underbody lighting to trucks, Jeeps, SUVs, golf carts, ATVs, and similar 12V vehicles. It includes four RGB LED pods, four 48.42-inch extension wires, and safety fuses. Each pod uses 18 SMD lamp beads, while the ABS housings carry an IP68 water-resistance rating for rain, mud, and snow. At around $24, it offers a low-cost way to add wheel-well or underbody lighting.

The phone app works with iOS and Android devices through Bluetooth. It supports color selection, timing, flashing, automatic settings, and music-synced effects. The system can display up to 16 million colors and remembers the last lighting mode after shutdown. A brake-warning function changes the lights to red when the vehicle brakes. Installation is fairly simple, but the pods still need wiring, mounting, and a proper 12V connection. The four extension cables help with placement on larger vehicles, though coverage depends on the vehicle’s size and mounting points.

Pros

• App control provides color, timing, flash, automatic, and music modes.
• IP68-rated ABS pods suit wet and dirty off-road conditions.
• Brake-linked red lighting adds a useful visibility feature.

Cons

• Four pods may not provide full underbody coverage on long trucks or SUVs.
• Installation requires routing wires and connecting the pods before power, so it is not a plug-and-play accessory.

Check Price on Amazon →

2. Nilight RGB LED Rock Lights Kit

Best for: Trucks, ATVs, and UTVs

The Nilight RGB LED Rock Lights Kit adds colorful underbody lighting to off-road vehicles, wheel wells, and chassis areas. It includes four pods, four rubber pads, four wiring harness sets, and one controller. Bluetooth app control works with iPhone and Android devices, with options for scheduled operation, music-synced lighting, flashing effects, and automatic control. Around $46, it costs less than many larger multi-pod kits.

Each lamp uses a die-cast aluminum housing and toughened glass lens. The lights are listed at 500 lumens with a 120-degree flood beam, so they should spread light across nearby ground rather than create a narrow spotlight. Nilight also lists waterproof, shockproof, dust-proof, and rust-proof protection, plus a rated lifespan of up to 50,000 hours. That makes the kit suited to exposed areas under trucks, Jeeps, motorcycles, boats, tractors, and similar vehicles. Installation requires care, though. The instructions say to connect all four pods together before connecting power, which helps prevent damage from a strong current.

Pros

• Bluetooth app control supports colors, timing, music mode, flashing, and automatic operation.
• Aluminum housings and toughened glass offer protection from water, dust, impacts, and rust.
• Four pods and a 120-degree beam can provide broad accent lighting under a vehicle.

Cons

• Four lights may leave dark areas on long trucks or larger SUVs.
• Installation requires wiring all four pods before power, so it is not a quick single-light hookup.

Check Price on Amazon →

1. RGB LED Rock Lights Kit, 6-Pod Vehicle Underglow Kit

Best for: Nighttime UTV and truck owners

This 12V kit includes six LED pods for underbody lighting on UTVs, ATVs, golf carts, trucks, SUVs, and similar vehicles. Its 160 SMD LEDs produce adjustable RGB colors, with brightness, flashing, fading, and music-sync modes controlled through a phone app or RF remote. At around $42, it offers a low-cost way to add colored lighting beneath a vehicle.

The silicone light housings carry an IP68 rating, which helps protect them from water, sand, and dirt. The controller is not waterproof, so it needs a sheltered mounting spot. Dual-zone control lets you set different colors on each side, while the remote works within about 32.8 feet. A selectable brake mode changes the lights to red, and the inline fuse and power switch add basic electrical protection. The pods can also help illuminate the undercarriage during nighttime inspections, though they should not replace proper work lights.

Pros

• Six IP68-rated pods resist water, dirt, and sand.
• App and RF controls offer color, brightness, and music modes.
• Inline fuse and power switch help protect the vehicle circuit.

Cons

• The controller is not waterproof and requires protected placement.
• Installation may require routing wires and finding a suitable 12V connection.

Check Price on Amazon →

Buying Guide

The most important factor is weather resistance, because an ATV’s underside faces mud, spray, dust, and flying stones. Choose lighting rated at least IP65, with sealed connectors and a controller protected from direct water.

• Weather rating: Look for IP65 or IP67 protection. IP67 units can handle brief water immersion, while IP65 covers strong water jets but not submersion.
• Power setup: Confirm the kit matches your ATV’s 12-volt electrical system. A fuse, relay, and wiring rated for at least 5 amps add practical protection.
• Light coverage: A four-wheel ATV usually needs 10 to 16 feet of strip or tube lighting. Kits with four to six sections make it easier to cover the front, sides, and rear.
• Mounting method: Favor aluminum channels, thick adhesive backing, or screw mounts. Keep lights at least 2 inches above the lowest skid plate edge to reduce rock strikes.
• Controls and price: Bluetooth or wired remotes offer better control than a basic switch. Expect to pay about $35 to $120, and choose a kit with a two-year warranty when possible.

If you must compromise, prioritize IP-rated construction and protected wiring over extra colors or app features.

Frequently Asked Questions

How do I choose ATV underglow lights?

Choose ATV underglow lights by checking voltage compatibility, weather protection, brightness control, mounting method, and warranty before buying. For example, a 12-volt kit with an IP67 rating and adhesive-backed strips suits many recreational ATVs, but confirm your vehicle’s wiring and available space first.

What color ATV lights are legal?

ATV underglow color rules depend on local laws, and many areas restrict blue, red, or flashing lighting on public roads. A kit with adjustable colors can still work for private trails, but check your state or provincial code before using anything beyond steady white or amber.

Can I install LED ground lights on an ATV myself?

Yes, most ATV LED underglow kits can be installed at home if you can connect 12-volt wiring, secure the strips, and protect the fuse. Many kits use four to six light bars and include a remote, while waterproof connectors and heat-shrink tubing help protect joins from mud.

Are wireless-controlled ATV glow kits waterproof?

Some are waterproof, but the rating applies to specific strips and connectors, not always the controller or battery box. Look for IP65 to IP68 protection, then mount the control module under a covered panel and keep it away from standing water.

Conclusion

The RGB LED Rock Lights Kit, 6-Pod Vehicle Underglow Kit is the top pick for ATV owners who want colorful trail lighting, broad coverage, and app-based control at a reasonable setup size. If your priority is a simpler install or a lower upfront cost, choose a smaller pod kit with a basic wired controller instead. Before buying, double-check each kit’s pod and cable size, ATV compatibility, included quantity, mounting hardware, and current price, since listings can change. Also confirm the power connection, weather rating, and controller range for your riding conditions. A good match should fit your machine without stretched wires or unused parts. Pick the kit that suits your ATV, budget, and night-riding plans.