7 Best Bow Case for Mathews VXR 31.5 Owners

For most buyers seeking the best bow case for mathews vxr 31.5, the SKB iSeries Mathews Lift33/Phase4 33 Bow Case is the top pick because its molded, waterproof shell provides stronger protection than a soft case. It is built around Mathews’ Lift33 and Phase4 33 platforms, with a protective interior that helps keep a compound bow secure during vehicle transport or storage. This case suits archers who want a dedicated Mathews option instead of a generic container.

This guide is for Mathews owners choosing a hard bow case for road trips, range days, or long-term storage. The key factors are interior length and width, shell material, padding, latch quality, and carrying weight. A case must hold the bow without pressing on the cams or letting accessories shift. The seven picks below are ranked with clear reasons and honest drawbacks for each.

Quick Comparison

7 Top Bow Cases for the Mathews VXR 31.5

This ranked list counts down to the top pick, with each bow case assessed for fit, protection, storage, and carrying comfort.

7. MTM BC34TD Takedown Recurve Bow Case

Best for: Takedown bow owners who fly

The MTM BC34TD is a hard-shell storage case for one target or hunting bow setup. Its high-impact polypropylene body measures 35 by 11.8 by 5.4 inches and weighs 4.7 pounds. Precut foam supports a riser up to 25 inches, while accessory pockets fit sights, strings, and stabilizers up to 24 inches long.

A divided arrow section holds up to 16 arrows measuring 34 inches or less. Separating each shaft helps protect fletching from bends during transport. Four snap latches keep the lid closed, and four padlock points add security for airline trips or long drives. The case is made in the USA and sells for around $59, though prices change. It fits one bow setup, not multiple complete bows, and the bow, arrows, and accessories come separately.

Pros

• High-impact polypropylene provides a tougher shell than soft bow bags.
• Precut foam protects the riser and limbs during transport.
• Dedicated slots organize up to 16 arrows and accessories.

Cons

• It holds only one bow setup, limiting storage for archers with multiple bows.
• The 34-inch arrow limit and fixed foam layout may not fit longer or unusual equipment.

Check Price on Amazon →

6. SKB iSeries Mathews Lift33/Phase4 Bow Case

Best for: Mathews Lift33 owners traveling often

This hard-shell bow case is built for Mathews Lift33 and Phase4 33 compound bows. Its iSeries construction gives the bow a protective outer shell, while custom-cut foam holds the compatible bow shape in place. This is not a general-purpose case, so fit matters. At around $485, it targets archers who want serious protection for transport and storage, not a low-cost soft case.

The waterproof and dustproof build helps shield the bow from rain, dirt, and airborne dust during trips or storage. Secure latches help keep the lid closed, and the carry handle makes moving the case simpler. Its compact, lightweight design should be easier to move between a vehicle, range, and home. The custom interior is the main reason to choose this model, since generic padding may not hold these two bow models as securely.

Pros

• Custom foam fits Mathews Lift33 and Phase4 33 bows.
• Waterproof and dustproof construction protects gear from moisture and dirt.
• Carry handle and secure latches support easier transport.

Cons

• The interior is limited to specific Mathews bow models.
• Around $485, it costs much more than basic soft bow cases.

Check Price on Amazon →

5. Flambeau Outdoors Formula Bow Case

Best for: Archers transporting 43-inch compound bows

The Flambeau Outdoors Formula Bow Case uses a hard ABS shell for bow transport and storage. It fits bows up to 43 inches and weighs 18.25 pounds before loading, so it provides strong protection without reaching the weight of many oversized travel cases. The case is made in the USA and uses an adjustable, foam-free interior instead of shaped foam blocks.

Its standout feature is the shock-absorbing rubber membrane. This system holds the bow above the case surface, helping keep sights, cams, cables, and strings away from direct contact with the shell. A weatherproof gasket and automatic pressure-release valve create an air chamber that helps reduce crush and impact damage during travel. The attached-quiver design also saves setup time at the range or hunting site. At around $163, it costs more than basic bow cases, but the floating interior may appeal to owners who want protection without compressing delicate components.

Pros

• Adjustable rubber membrane protects precision parts from direct shell contact.
• Fits bows up to 43 inches and allows the quiver to stay attached.
• ABS shell, gasket, valve, and air chamber support heavy-duty travel protection.

Cons

• The 18.25-pound unloaded weight makes it cumbersome for long carries.
• Its 43-inch fit limit may exclude longer bows or setups with unusual accessories.

Check Price on Amazon →

4. XTACER Tactical Recurve Bow Case

Best for: Recurve archers carrying takedown bows

The XTACER Tactical Bow Case is a padded carrier for disassembled recurve bows. It fits bows up to 68 inches long and uses 600D tear-resistant polyester with a sturdy double-zip closure. Thick foam lines both the top and bottom, helping shield the bow from bumps during transport. Around $24, it offers a practical storage option without a high price.

Storage is the strongest feature. Three soft slotted pockets separate the riser and two limbs, while two large interior pockets hold items such as gloves, strings, arm guards, and arrow pullers. A smaller outside pocket keeps quick-access gear nearby. The adjustable shoulder strap, padded handle, and lightweight foam filling give you two carrying options. A hook-and-loop panel also accepts patches for personal customization. The main limitation is its intended format: this is for a takedown bow, not a fully assembled setup.

Pros

• Three soft slots keep the riser and limbs separated.
• Thick foam padding covers both case ends.
• Multiple pockets organize strings, gloves, and small accessories.

Cons

• It cannot carry a fully assembled bow.
• Unusually wide limbs or bulky gear may reduce usable storage space.

Check Price on Amazon →

3. SKB Cases 3i-4318-MPL-T Bow Case

Best for: Mathews Iseries bow owners traveling outdoors

The SKB Cases 3i-4318-MPL-T is a tan, molded bow case shaped for Mathews Iseries bows. Its waterproof, MIL-SPEC construction helps protect the bow from rain, dust, and rough transport. Four hook-and-loop straps hold the bow in place, reducing movement inside the case. Around $313, it costs more than many soft bow cases, but it provides stronger protection for regular travel.

Storage is a clear strength. A lower compartment holds up to 12 arrows, while the lid has room for a quiver and two accessory boxes. Those boxes use part number 3i-0702-1 and are sold separately, so the case’s storage setup may require extra spending. The lifetime warranty also adds long-term value, though buyers should confirm the warranty process and coverage before purchase. Since this is a shaped case, fit matters more than with a universal model. It makes the most sense for owners with a compatible Mathews bow, not archers who switch between several bow designs.

Pros

• Waterproof, MIL-SPEC construction gives the bow a protective hard-shell enclosure.
• Four hook-and-loop straps keep the bow secured during transport.
• Separate storage holds 12 arrows, plus a quiver and two accessory boxes.

Cons

• The shaped interior limits compatibility to suitable Mathews Iseries bows.
• The two accessory boxes are sold separately, adding to the already high purchase price.

Check Price on Amazon →

2. SKB iSeries Mathews Shaped Bow Case

Best for: Mathews owners traveling with bows

The SKB iSeries Mathews Shaped Bow Case is a protective storage option built around the contours of compatible Mathews bows. Its OD Green exterior uses waterproof construction, helping shield the bow from rain, dust, and changing travel conditions. A shaped interior can reduce excess movement inside the case, though fit depends on the exact bow model and setup.

This case also targets easier transport. Its lightweight design should be more manageable than a heavy hard case, while built-in wheels help during longer walks through airports, parking areas, or range grounds. Locking mechanisms add another layer of security when the case is stored or transported. At around $315, it costs more than basic soft bow bags, but the price reflects its hard protective build and travel-focused design. Buyers should confirm compatibility before ordering, since the shaped interior is not a universal fit.

Pros

• Waterproof construction helps protect the bow in wet weather and damp storage areas.
• Built-in wheels make the case easier to move across smooth floors and paved surfaces.
• Locking mechanisms provide added security during transport or storage.

Cons

• The custom-shaped interior may not fit non-Mathews bows or setups with unusual accessories.
• Around $315, it costs substantially more than many soft-sided bow cases.

Check Price on Amazon →

1. SKB iSeries Mathews Lift33/Phase4 33 Bow Case

Best for: Mathews owners needing rugged transport

The SKB iSeries Mathews Lift33/Phase4 33 Bow Case is a hard protective case made for two specific Mathews bows. Its OD Green exterior uses durable iSeries construction, while interior foam padding cushions the bow during storage and transport. The fitted design suits the Mathews Lift33 and Phase4 33, giving the bow a more secure home than a general-purpose archery case. A carry handle and secure latches make the case easier to move and close.

Waterproof and dustproof construction adds useful protection during travel, storage, and poor weather. That does not make the case indestructible, but it should help keep rain, dirt, and airborne debris away from the bow. Around $485, this is a premium purchase for archers who want a dedicated case for one of two compatible models. The strongest value comes from the custom fit and protective shell, not from extra storage features. Buyers should confirm their exact bow model before ordering, since this case does not target broad archery equipment compatibility.

Pros

• Custom-fit interior supports the Mathews Lift33 and Phase4 33.
• Waterproof and dustproof construction helps protect during outdoor transport.
• Foam padding cushions the bow, while latches keep the case closed.

Cons

• Around $485, it costs much more than basic soft bow cases.
• The dedicated fit limits use with bows outside the listed Mathews models.

Check Price on Amazon →

Buying Guide

The most important factor is interior fit. A case must hold the 31.5-inch axle-to-axle bow without pressing against cams, limbs, sights, or the rest.

• Interior dimensions: Choose at least 34 inches of usable length, 14 inches of width, and 4 inches of depth. Measure the assembled bow first, including the sight and stabilizer.
• Padding and retention: Look for 1 inch or more of closed-cell foam, plus adjustable straps or hook-and-loop blocks that hold the riser and limbs in place.
• Hard or soft shell: Pick a hard case for airline travel, truck beds, or frequent transport. A soft case weighs less and suits local range trips.
• Accessory storage: Require room for at least 12 arrows, a release, tools, and a quiver. Separate pockets prevent metal parts from rubbing the bow.
• Carry system and price: Backpack straps help with walks longer than 10 minutes. Expect roughly $60 to $140 for a padded soft case and $120 to $300 for a hard case.

If you cannot get every feature, prioritize interior clearance and secure bow retention over pockets or lower weight.

Frequently Asked Questions

How do I choose a bow case for a Mathews VXR 31.5?

Choose a bow case with internal dimensions larger than the VXR 31.5 and enough room for attached accessories. Measure the bow with its sight, rest, quiver, and stabilizer installed, then compare those measurements with the case specifications. Adjustable straps and movable padding help prevent pressure on the cams and limbs.

What size case fits a Mathews VXR 31.5?

A case with at least 34 inches of internal length is a practical starting point for the 31.5-inch axle-to-axle bow. Allow extra space for the sight, cams, and accessories, especially in a compact case. Check internal width and depth too, since thick padding can reduce usable room by 1 to 2 inches.

Can a hard case protect this compound bow during travel?

A hard case provides the strongest protection for a Mathews VXR 31.5 during vehicle travel or airline handling. Choose molded plastic or reinforced composite construction, padded interiors, secure latches, and tie-down straps. Models with at least two sturdy latches and a separate accessory compartment keep the bow stable while reducing contact with loose gear.

Are soft bow cases suitable for a Mathews VXR 31.5?

Soft bow cases suit a Mathews VXR 31.5 for home storage, range trips, and light vehicle transport. Pick one with thick padding, reinforced handles, interior straps, and separate pockets for arrows and accessories. A case with 1-inch or thicker padding offers more protection than a thin fabric sleeve, but it cannot match a hard shell’s impact resistance.

Conclusion

The SKB iSeries Mathews Lift33/Phase4 33 Bow Case suits archers who want rigid protection, organized storage, and room for a Mathews VXR 31.5 setup during travel. If your priority is lower weight and easier home storage, pick a compatible padded soft case instead, since it usually carries less bulk and costs less. Before buying, double-check the case’s interior size, VXR 31.5 compatibility, included quantity, and current price, since listings can change and model names can be confusing. Its hard shell is most useful for vehicle travel and shared storage, but the larger format may waste space in a closet. Measure your bow with accessories attached, then compare that figure with the listed interior dimensions.