7 Best ATV Cup Holder for Off-Road Rides

Universal Aluminum Cup Holder Clamp is the best atv cup holder for most buyers because its clamp design attaches quickly without needing a permanent mount. The aluminum construction also gives it a sturdy, low-bulk profile for carrying a bottle, can, or travel mug on the trail.

This guide is for ATV riders who want easier access to drinks during work, hunting, camping, or recreational rides. The key factors are the holder’s opening size, clamp compatibility, material strength, and resistance to spills on rough ground. A good mount should stay secure without blocking controls or taking up valuable rack space. The 7 picks below are ranked by their strongest features, with clear reasons to consider each one and honest drawbacks for each. That makes it easier to match a drink holder to your ATV, riding style, and budget.

Quick Comparison

7 Top ATV Cup Holder Picks

These picks are ranked by fit, durability, mounting security, and value, counting down to the top ATV cup holder.

7. KEMIMOTO Motorcycle Cup Holder

Best for: Riders carrying medium-sized drinks

The KEMIMOTO holder is a handlebar-mounted drink carrier for motorcycles, ATVs, bikes, scooters, golf carts, and similar vehicles. The listing includes two holders. A metal clamp fits bars from 0.6 to 1.56 inches wide, while two anti-slip pads help protect the bar and reduce movement. The clamp uses a crocodile-style bite pattern for added grip.

Each carrier fits cups and bottles from 12 to 28 ounces. Its flexible arms open to about 3.5 inches, and a bottom adjustment screw lets you tighten the fit around cans, water bottles, and travel mugs. The thicker PP holder is designed to resist cracking, while the metal clamp should handle rougher rides better than a basic plastic mount. It can fit bottles from brands such as Stanley, Contigo, and Nalgene, though exact fit depends on the container’s shape. At around $35 for the pair, it offers useful capacity for riders who need two drink holders.

Pros

• Fits 0.6-to-1.56-inch handlebars across many vehicle types.
• Holds 12-to-28-ounce drinks with a 3.5-inch maximum diameter.
• Metal clamp and two included pads help reduce slipping.

Cons

• Open sides provide no lid or spill protection on rough trails.
• Oversized mugs and bottles wider than 3.5 inches will not fit.

Check Price on Amazon →

6. KEMIMOTO Motorcycle Cup Holder

Best for: ATV riders needing a secure drink spot

The KEMIMOTO Motorcycle Cup Holder is a clamp-on drink carrier for ATVs, motorcycles, bicycles, boats, wheelchairs, strollers, walkers, and scooters. Its metal mounting clamp fits bars from 0.6 to 1.56 inches in diameter. Installation requires no drilling, and the clamp can sit vertically or horizontally. At around $28, it costs more than basic plastic holders but offers a sturdier mounting design.

The holder accommodates cups and bottles up to about 2.8 inches wide, with support for drinks up to 20 ounces. That size suits many Stanley, Contigo, and Nalgene bottles, along with sports drinks, beer bottles, and nursing bottles. An anti-skid pad adds friction between the clamp and the mounting surface. It also helps protect the bar from scratches. The compact shape should leave reasonable room around the controls, though fit depends on your vehicle and mounting location.

Pros

• Metal clamp offers stronger support than plastic mounting clips.
• Fits bars from 0.6 to 1.56 inches without drilling.
• Anti-skid padding helps reduce slipping and surface damage.

Cons

• The 2.8-inch opening will not fit many wide insulated tumblers.
• A 20-ounce drink limit may be restrictive for longer rides.

Check Price on Amazon →

5. KEMIMOTO Motorcycle Cup Holder with Alligator Clamp

Best for: UTV riders carrying oversized drinks

The KEMIMOTO cup holder is a soft, drawstring drink bag for motorcycles, ATVs, UTVs, scooters, boats, kayaks, bikes, and walkers. Its 7.8-inch height fits large cups and bottles up to 32 ounces, including cans and stainless steel drinkware. A 5.5-inch front pocket adds space for keys, cards, or other small items. At around $26, it costs more than a basic open cup cage.

The aluminum foil lining helps contain spills and makes the interior easier to wipe clean. It can also help drinks stay hot or cold for a short period, but it is not a replacement for an insulated cooler. The adjustable clamp fits poles and handlebars measuring 0.6 to 1.5 inches across. Two screws, a gasket, rubber padding, and interior hook-and-loop fasteners help hold the bag in place while protecting the mounting surface. The hand screw allows quick removal without tools.

Pros

• Holds drinks up to 32 ounces, including large bottles and cans.
• 5.5-inch front pocket stores small personal items.
• Protective clamp parts help reduce scratches and unwanted movement.

Cons

• The clamp only fits poles from 0.6 to 1.5 inches in diameter.
• The foil lining offers temperature control for only a short duration.

Check Price on Amazon →

4. KEMIMOTO Motorcycle Cup Holder

Best for: Riders needing a handlebar drink holder

This KEMIMOTO cup holder mounts to motorcycles, ATVs, dirt bikes, bicycles, scooters, boats, wheelchairs, walkers, or strollers with handlebars measuring 0.6 to 1.56 inches. Its high-impact plastic body pairs with a metal clamp, giving it a tougher build than a simple plastic clip. A rubber pad sits between the clamp and bar to reduce movement and help prevent scratches.

The adjustable base supports containers from 12 to 28 ounces, with room for bottles up to 3.5 inches wide. That covers many 18, 21, and 24-ounce Hydro Flask bottles, plus common Yeti, Nalgene, and CamelBak sizes. A 360-degree joint lets you position the cup away from controls or your knees. The clamp uses a crocodile-bite style grip, but the fit still depends on your bar shape and available space. Installation should take minutes, since the package includes instructions, tools, and mounting hardware. At around $17, it offers useful flexibility for riders who want water or coffee within reach.

Pros

• Fits handlebars from 0.6 to 1.56 inches across multiple vehicle types.
• Holds 12- to 28-ounce drinks and bottles up to 3.5 inches wide.
• 360-degree adjustment and a rubber pad allow flexible, protected mounting.

Cons

• It will not fit handlebars outside the listed 0.6- to 1.56-inch range.
• A 3.5-inch-wide bottle may leave limited room around nearby controls or accessories.

Check Price on Amazon →

3. KEMIMOTO Motorcycle Cup Holder

Best for: ATV riders carrying large drinks

This motorcycle cup holder attaches to handlebars or poles measuring 0.6 to 1.5 inches wide. Its adjustable alligator clamp uses two screws instead of one, plus a cross-mounting hole, to reduce spinning and loosening. A hand screw makes installation and removal straightforward. The holder costs around $24, though prices can change.

The main pouch uses 600D Oxford fabric rather than plastic or metal. It has a 24-ounce drink capacity, a 3.94-inch bottom diameter, and a drainage opening for spilled water. An adjustable drawstring tightens around the rim, which helps keep a bottle or cup in place on rough paths. Two separate mesh pockets hold small items such as keys, cards, or a phone. The fabric is washable and will not rust, but it may not offer the rigid support some riders prefer from a hard cup cage.

Pros

• Two clamp screws and a cross-mounting hole provide a more secure attachment than a single-screw design.
• Fits poles from 0.6 to 1.5 inches and uses a hand-tightened mounting screw.
• 600D fabric, a drawstring closure, drainage, and two mesh pockets add practical storage.

Cons

• The 3.94-inch bottom may be too wide for some mounting areas or narrow drink containers.
• It is not compatible with Road King, Spyder RT, or Burgman 400s models.

Check Price on Amazon →

2. FODSPORTS Motorcycle ATV Cup Holder

Best for: Motorcyclists carrying medium drinks

This FODSPORTS cup holder attaches to motorcycle, ATV, bicycle, scooter, boat, stroller, wheelchair, or golf cart tubing. Its aluminum alloy clamp fits round bars from 0.5 to 1.57 inches and square tubing from 0.5 to 1 inch. Rubber pads inside the clamp help reduce slipping and protect the mounting surface. The clamp also rotates through 360 degrees, so you can position the holder around angled bars.

The adjustable basket fits drink containers from 2.08 to 3.6 inches wide, including bottles, coffee cups, handled mugs, and sports containers. FODSPORTS rates it for drinks up to 32 ounces, with a 12-ounce minimum listed for supported cups. The full-wrap frame and TPE contact material help keep a container in place on rough paths. Installation reportedly takes under three minutes, and the package includes a hex nut tool. At around $20, it offers useful flexibility without a large accessory cost.

Pros

• Fits many vehicles and mobility devices, thanks to its broad clamp range.
• Holds containers up to 32 ounces and adjusts for different diameters.
• 360-degree rotation helps position drinks on angled handlebars.

Cons

• Containers wider than 3.6 inches or heavier than 32 ounces are outside the listed limits.
• Square tubing support stops at 1 inch, and the holder may not fit every frame shape.

Check Price on Amazon →

1. Universal Aluminum Cup Holder Clamp

Best for: Riders needing a sturdy universal drink holder

This clamp-on cup holder fits handlebars and tubes measuring 0.6 to 1.5 inches wide. The aluminum clamp suits motorcycles, ATVs, bicycles, wheelchairs, and golf carts. Installation requires no tools, and the mount can sit vertically or horizontally. At around $20, it offers a practical way to add drink storage without replacing existing equipment.

The holder measures 3.85 inches across and 3.7 inches deep. Its tapered shape fits many cups, mugs, cans, and bottles, while three silicone pads help reduce movement and scratches. A U-shaped groove provides space to hang glasses or a keychain. The holder is rated for at least 3 pounds, so it can support common drinks, including stainless steel bottles. Aluminum construction should handle outdoor moisture better than basic plastic, though the listing does not provide a specific weatherproof rating.

Pros

• Fits tubes from 0.6 to 1.5 inches, covering many common handlebars and frames.
• Three silicone pads help limit rattling, slipping, and contact marks.
• Tool-free, adjustable mounting works in vertical or horizontal positions.

Cons

• The wide 3.85-inch opening may not hold narrow cans securely without extra padding.
• There is no listed lid, retention strap, or insulation, so drinks remain exposed to spills, dust, and temperature changes.

Check Price on Amazon →

Buying Guide

Fit and mounting security matter most when choosing an ATV drink holder. A loose mount can spill drinks, rattle on rough trails, or fall off during turns.

• Mount compatibility: Confirm the clamp fits your ATV’s bar, rack, or frame. A holder with a 0.75- to 1.25-inch adjustable clamp suits many tubular bars, but measure first.
• Cup size: Look for an opening between 3.25 and 4 inches wide. This range can hold standard cans, 20-ounce bottles, and many insulated travel cups.
• Retention design: Choose a deep basket, flexible grip arms, or a tightening ring. At least 3 inches of side support helps keep drinks stable over bumps.
• Material and drainage: Powder-coated aluminum or thick ABS plastic resists outdoor wear. Drain holes in the base prevent water from collecting after rain or washing.
• Installation and price: Tool-free clamps make repositioning easier, while bolt-on mounts usually provide firmer attachment. Expect to pay about $15 to $45 for a single holder.

If you cannot have everything, prioritize a secure, correctly sized mount over extra features or lower price.

Frequently Asked Questions

How do I choose an ATV cup holder?

Choose an ATV cup holder with a clamp or mount that matches your vehicle, plus enough depth for your drink. Measure the bar or rack first, then compare the holder’s opening with your cup diameter. A 3.5-inch opening fits many travel mugs, but oversized bottles may need an adjustable model.

What size cup fits ATV drink holders?

Most ATV drink holders fit cups from about 2.5 to 3.5 inches wide, but the exact range depends on the design. Check the product opening before buying, especially for insulated bottles. A holder measuring 3.75 inches across may fit a 32-ounce bottle, while a narrow cup design may not.

Can I use a drink holder on any ATV?

You can use a drink holder on most ATVs if its mount fits a rack, handlebar, or existing accessory point. Choose a model with a locking strap or firm clamp for rough trails. For example, a two-point mount usually stays more stable than a single loose clip when carrying a full 32-ounce bottle.

Are ATV cup holders waterproof?

Some ATV cup holders are weather-resistant, but not all are waterproof. Look for sealed mounting hardware, drainage holes, and a stated outdoor-use rating. A holder with a 0.25-inch drain hole can release spilled liquid, while open foam designs may absorb water and dry slowly after rain.

Conclusion

The Universal Aluminum Cup Holder Clamp is the top recommendation for ATV riders who want a durable, adjustable mount that can fit different handlebar or frame locations. If your priority is carrying a large insulated bottle, choose a wider, deeper carrier instead, since compact clamp-on designs may not leave enough room for bulky drinkware. Before buying, double-check the holder’s opening and depth against your cup or bottle, confirm compatibility with your ATV’s mounting area, verify how many holders come in the package, and compare the current price across sellers, since listings and bundle contents can change. A few minutes of checking can prevent a loose fit, an unusable mount, or an order that costs more than expected.